Coatings made in germany Titel Seite new 1

ZviZZer Paint Ceramic Coat is the hardest hybrid silicon / polymer hard coating from ZviZZer and is designed to protect paint surfaces optimally and permanently, with moderate workload.

The molecular matrix structure forms a wafer-thin anti-adhesive layer that is strong and hard in its capacity.

glass new

GLASS COAT

ZviZZer Glass Polish is a specially developed cleaning polish for the pore-deep cleaning of glass surfaces. The product easily removes mineral deposits such as lime and thus ensures a clean surface. This cleaning process is absolutely necessary to achieve a 100% adhesion of our glass sealants.

Thanks to state-of-the-art high-performance particles, we offer you the highest protection for glass surfaces. ZviZZer Glass Coat docks directly to the glass molecule and significantly improves the glass surface in its dirt-repellent effect. The product has special surface functions and is highly hydrophobic.

A surface optimization on vehicles with ZviZZer Glass Coat provides a clear view, even in the event of a sudden downpour. Protect yourself, your environment and ensure more safety on the road.
ZviZZer GLASS COAT offers 12-18 months or 15,000 km protection.

   What you need:
  • Glass Coat, 50ml
  • Glass Polish, 50ml
  • Clean Top. 250ml
  • Applicator Block, 10 x 3 x 2cm
  • Applicator cloth, white, 12 x 10cm
  • Microfiber cloth, black
  • We recommend to use Nitril-gloves for protection of your skin!

    Wash Applicator Cloths as well as all microfiber cloths prior to using them. All accessories have to be dry when used.

    APPLICATION (GLASS COAT)

    1. Use a GLASS CLEANER to clean the glass surface.
    2. Deep clean the glass surface using the GLASS POLISH.
    3. Prepare the surface by cleaning it properly with CLEAN TOP.
    4. Wrap the application cloth around the applicator.
    5. Apply 12-18 drops of product to the application cloth and then for approximately 1-2 minutes apply to a small area of the glass surface until the product is barely visible. Should the product dry too quickly apply fresh product and repeat the process.
    6. After short period of 2-5 minutes the remaining product residue can be removed using a microfibre cloth.

    Do not apply the product or leave to dry in direct sunlight.

    SAFETY PRECAUTIONS

    Keep away from heat, hot surfaces, sparks, naked flames and all other sources of ignition. Do not smoke when using the product. Keep the container closed tight. Always wear appropriate safety clothing and eye protection. After use always wash your hands. Should the product come in contact with your eyes then rinse your eyes for at least one minute with clean water. If using contact lenses then remove them, ensuring that your fingers are clean, and rinse your eyes for a further one minute with clean water. If the eye irritation persists then seek immediate medical attention. Seek help when the product has come in contact with skin or hair. All contaminated clothes must be removed immediately. Rinse skin and hair with water, preferably in a shower to remove all traces of the product. Disposal of the product container(s) must comply with the regional, national and international regulations. Keep out of the reach of children. Always read the safety instructions before using the product. Do not put the product into body orifices. Keep out of the reach of individuals with mental disabilities.

    Warning: Fluid and vapors burn easily. This product can cause severe irritation of the eyes should they come in contact with the product.

    If you have any questions about our products or need support, please contact us.

  • We recommend to use Nitril-gloves for protection of your skin!

    Wash Applicator Cloths as well as all microfiber cloths prior to using them. All accessories have to be dry when used.

    APPLICATION (GLASS COAT)

    1. Clean the surface using ZviZZer CLEAN TOP
    2. Apply GLASS POLISH to either a microfiber cloth or applicator cloth
    3. Whilst applying a light pressure use straight or circular movements to polish the surface
    4. Remove excess product using a microfiber cloth
    5. Finally, clean the surface using ZviZZer CLEAN TOP or glass cleaner

    APPLICATION MACHINE

    1. Clean the surface using ZviZZer CLEAN TOP
    2. Apply GLASS POLISH to the polishing pad
    3. Whilst applying a light pressure use criss-cross movements to polish the surface
    4. Remove excess product using a microfiber cloth
    5. Finally, clean the surface using ZviZZer CLEAN TOP or glass cleaner

    SAFETY PRECAUTIONS

    Keep away from heat, hot surfaces, sparks, naked flames and all other sources of ignition. Do not smoke when using the product. Keep the container closed tight. Always wear appropriate safety clothing and eye protection. After use always wash your hands. Should the product come in contact with your eyes then rinse your eyes for at least one minute with clean water. If using contact lenses then remove them, ensuring that your fingers are clean, and rinse your eyes for a further one minute with clean water. If the eye irritation persists then seek immediate medical attention. Seek help when the product has come in contact with skin or hair. All contaminated clothes must be removed immediately. Rinse skin and hair with water, preferably in a shower to remove all traces of the product. Disposal of the product container(s) must comply with the regional, national and international regulations. Keep out of the reach of children. Always read the safety instructions before using the product. Do not put the product into body orifices. Keep out of the reach of individuals with mental disabilities.

    Warning: Fluid and vapors burn easily. This product can cause severe irritation of the eyes should they come in contact with the product.

    If you have any questions about our products or need support, please contact us.

Coating Set 5 products Pictogram 300

PAINT CERAMIC COAT

ZviZZer Paint Ceramic Coat is the hardest hybrid silicon / polymer hard coating from ZviZZer and is designed to protect paint surfaces optimally and permanently, with moderate workload.

ZviZZer Paint Ceramic Coat offers 3 years or 30,000 km protection.

The molecular matrix structure forms a wafer-thin anti-adhesive layer that is strong and hard in its capacity.

The high-performance particles combine chemically with the surface and settle on the paint pores. They form after curing a high gloss protective layer. This very simple way of surface optimization protects the paint from damage such as oxidation, salt, acids and insects.

Due to the coating with ZviZZer Paint Ceramic Coat, the clear coat becomes harder and scratch-resistant (about 60-65%) than conventional paints thanks to the high-performance particles on the surface. In particular, the new environmentally friendly, water-soluble paints are very soft in their composition. Even if you only wash your vehicle by hand, after some time, corresponding signs of wear and tear develop. With ZviZZer Paint Ceramic Coat, these are minimized or even prevented.

ZviZZer Paint Ceramic Coat prevents corrosive and acidic products in the pH range of 3-12 from attacking the clearcoat.

ZviZZer Paint Ceramic Coat guarantees that painted surfaces retain their original appearance over time. The product is yellowing and abrasion resistant.

The product docks directly to the paint molecule, improves the surface in its dirt-repellent property and forms a wafer-thin anti-adhesion protective layer.

ZviZZer Paint Ceramic Coat deepens the shine and color of the surface extremely.

    What you need:
  • Paint Ceramic Coat, 100ml
  • Clean Top, 250ml
  • Applicator Block, 10 x 3 x 2cm
  • Applicator cloth, white, 12 x 10cm
  • Microfiber cloth, black
  • Product
    Art. Nr
    Clean Top
    250ml
    ZV-CT000250N

    Paint Ceramic Coat
    100ml
    ZV-PC000100N

    Applicator Block
    10 x 3 x 2cm
    ZV-CB00121

    Applicator Cloth white
    12 x 10cm
    ZV-CA00122

    Microfiber Cloth, black
    40 x 40cm
    ZV-MF004001US

  • We recommend to use Nitril-gloves for protection of your skin!

    Wash Applicator Cloths as well as all microfiber cloths prior to using them.
    All accessories have to be dry when used.

    APPLICATION (PAINT CERAMIC COAT)
    1. Prepare the surface using CLEAN TOP.
    2. Wrap the application cloth around the applicator.
    3. Apply 12-18 drops of product to the application cloth and apply quickly and evenly to the surface until a film is visible. Follow this step on small surface sections no larger than 60 cm x 60 cm.
    4. Leave the product to evaporate for 1-3 minutes or polish immediately.
    5. Remaining product residue can be removed using a microfibre cloth. Start at the edges of the coating and work inwards using straight and rapid movement.
    6. Using a clean microfibre cloth polish the surface. Start at the edges of the coating and work inwards using a circular motion; do not over apply pressure to the surface during this operation.
    7. Any visible smearing can be polished out using a microfibre cloth (5 Pack), check the surface with a light source to ensure quality control of the application.
    8. Should a higher level of protection be required, then after 25 minutes an additional coat can be applied, do not wait longer than 40 minutes to perform this additional coating operation.

    Do not apply the product or leave to dry in direct sunlight.

    Safety Precautions:

    Keep away from heat, hot surfaces, sparks, naked flames and all other sources of ignition. Do not smoke when using the product. Keep the container closed tight. Always wear appropriate safety clothing and eye protection. After use always wash your hands. Should the product come in contact with your eyes then rinse your eyes for at least one minute with clean water. If using contact lenses then remove them, ensuring that your fingers are clean, and rinse your eyes for a further one minute with clean water. If the eye irritation persists then seek immediate medical attention. Seek help when the product has come in contact with skin or hair. All contaminated clothes must be removed immediately. Rinse skin and hair with water, preferably in a shower to remove all traces of the product. Disposal of the product container(s) must comply with the regional, national and international regulations. Keep out of the reach of children. Always read the safety instructions before using the product. Do not put the product into body orifices. Keep out of the reach of individuals with mental disabilities.

    Warning: Fluid and vapors burn easily. This product can cause severe irritation of the eyes should they come in contact with the product.

    If you have any questions about our products or need support, please contact us.

Coating Set 2 products Pictogram 300

SPRAY COAT

ZviZZer SPRAY COAT is a specially developed longlasting silicone free spray coating for all external surfaces, such as paint, plastic and glass found on vehicles, caravans and yachts. ZviZZer SPRAY COAT is easy and quick to apply and provides excelent results and a high hydrophobic effect. ZviZZer SPRAY COAT deepens the shine and the colour depth of the surface. ZviZZer SPRAY COAT can also be used for after care maintenance of vehicles, which are already sealed with our surface protection systems. Thus extending the service life of the coating. Can be applied in multiple layers.

ZviZZer SPRAY COAT offers 6-10 weeks protection.

    What you need:
  • Spray Coat, 250ml
  • Applicator cloth, white, 12 x 10cm
  • Microfiber cloth, black
  • Product
    Art. Nr
    Spray Coat
    250ml
    ZV-SC000125N

    Applicator Cloth, white
    12 x 10cm
    ZV-CA00122

    Microfiber cloth, black
    ZV-MF004001US

  • We recommend to use Nitril-gloves for protection of your skin!

    Wash Applicator Cloths as well as all microfiber cloths prior to using them. All accessories have to be dry when used.

    APPLICATION (SPRAY COAT)

    Spray the product thinly on the surface and polish with the application cloth until you achieve a high-gloss and streak-free result.
    Excess material or light streaks can be polished later with a fresh microfibre cloth.
    Attention: do not use directly in the sun or allow to dry!

    Application rate: 3 to 5 ml per m²
    Processing temperature: + 5 ° C to + 30 ° C
    Storage and shelf life: at least 12 months at room temperature in tightly closed original containers.
    Storage temperature: + 10 ° C to + 25 ° C
    Keep away from direct sunlight and frost.

    SAFETY PRECAUTIONS

    After use always wash your hands. Should the product come in contact with your eyes then rinse your eyes for at least one minute with clean water. If using contact lenses then remove them, ensuring that your fingers are clean, and rinse your eyes for a further one minute with clean water. If the eye irritation persists then seek immediate medical attention. Seek help when the product has come in contact with skin or hair. All contaminated clothes must be removed immediately. Rinse skin and hair with water, preferably in a shower to remove all traces of the product. Disposal of the product container(s) must comply with the regional and international regulations. Keep out of the reach of children. Always read the safety instructions before using the product. Do not put the product into body orifices. Keep out of the reach of individuals with mental disabilities.

    If you have any questions about our products or need support, please contact us.

Spray Coat products Pictogram 300

FRESH-UP COAT

ZviZZer FRESH-UP COAT is a specially developed silicone free spray coating for all as-new smooth external surfaces, such as paint, plastic and glass found on vehicles, caravans and yachts. ZviZZer FRESH-UP COAT is very easy and quick to apply and provides excellent results and a high hydrophobic effect. ZviZZer FRESH-UP COAT deepens the shine and the colour depth of the surface. ZviZZer FRESH-UP COAT can also be used for after care maintenance of vehicles, which are already sealed with our surface protection systems. For extending the service life of the coating.

Durability: 2,000 km/8-10 weeks

    What you need:
  • Fresh-Up Coat, 250ml
  • Applicator cloth, white, 12 x 10cm
  • Microfiber cloth, black
  • Product
    Art. Nr
    Fresh-Up Coat
    250ml
    ZV-FU000250N

    Applicator Cloth, white
    12 x 10cm
    ZV-CA00122

    Microfiber cloth, black
    40 x 40cm
    ZV-MF004001US

  • We recommend to use Nitril-gloves for protection of your skin!

    Wash Applicator Cloths as well as all microfiber cloths prior to using them. All accessories have to be dry when used.

    APPLICATION (FRESH-UP COAT):

    Spray the product thinly on the surface and polish with the application cloth until you achieve a high-gloss and streak-free result.
    Excess material or light streaks can be polished later with a fresh microfibre cloth.

    Attention: Do not use directly in the sun or allow to dry!

    Application rate: 3 to 5 ml per m²
    Processing temperature: + 5 ° C to + 30 ° C
    Storage and shelf life: at least 12 months at room temperature in tightly closed original containers.
    Storage temperature: + 10 ° C to + 25 ° C
    Keep away from direct sunlight and frost.

    SAFETY PRECAUTIONS

    After use always wash your hands. Should the product come in contact with your eyes then rinse your eyes for at least one minute with clean water. If using contact lenses then remove them, ensuring that your fingers are clean, and rinse your eyes for a further one minute with clean water. If the eye irritation persists then seek immediate medical attention. Seek help when the product has come in contact with skin or hair. All contaminated clothes must be removed immediately. Rinse skin and hair with water, preferably in a shower to remove all traces of the product. Disposal of the product container(s) must comply with the regional and international regulations. Keep out of the reach of children. Always read the safety instructions before using the product. Do not put the product into body orifices. Keep out of the reach of individuals with mental isabilities.

    If you have any questions about our products or need support, please contact us.