Polishes made in germany headline 1

The modern, water-based ZviZZer POLISHING SYSTEM has been designed for a wide range of paint-specific applications. In combination with the coordinated polishing pads and their different grinding properties (coarse, medium, fine and ultrafine) you can achieve optimum results on all commercially available paints.

The precise amount and homogenous size of the novel aluminum oxide abrasive grain in the emulsion makes the difference to traditional polishes. The application impresses with the easy guiding of the polishing machine, the rapid processing and „tearing“ of the polish without any dust formation and the extremely easy removal of the residues on the paint surface.

MADE IN GERMANY“ guarantees the highest quality in production and a constantly controlled quality assurance at the highest level.

Polituren Headlines PC 5000 160
Zvizzer Polituren Doppelflaschen PC 5000 160 neu

To remove:
Deep Scratches

Application with:
Polishpad
(blue/stable hard)

 

Polituren Headlines HC 4000 160
Zvizzer Polituren Doppelflaschen HC 4000 160 neu

To remove:
Heavy Scratches

Application with:
Polishpad
(red/hard)

 

Polituren Headlines MC §000 160
Zvizzer Polituren Doppelflaschen MC 3000 160 neu 1

To remove:
Fine scratches

Application with:
Polishpad
(orange/medium)

Polituren Headlines FC 2000 160
Zvizzer Polituren Doppelflaschen FC 2000 160 neu

To remove:
Holograms

Application with:
Polishpad
(yellow/soft)

Polituren Headlines UC 1000 160
Zvizzer Polituren Doppelflaschen UC 1000 160 neu

To remove:
Micro Scratches

Application with:
Polishpad
(green/ultrasoft)

Polituren Headlines PC 5000 160 1
Zvizzer Polituren Doppelflaschen PC 5000 160 neu

PC 5000 PRE CUT SCRATCH REMOVER

Technical Description PreCut PC 5000DESCRIPTION
Pure pre-grinding polishing to recondition extremely weathered or damaged paintwork. Owing to the volume and the homogenous abrasive grain, this grinding polishing process ensures quick, optimum sanding to successfully remove deep scratching and abrasion marks from a grain size of P1500. Can be used on ALL (including scratch-resistant) fresh and hardened paint. Does not contain silicone or solvents.

PROCEDURE
We recommend the blue polishing pad for this procedure. Apply a sufficient quantity of PC5000 to the paint defect, surface or polishing pad. If you are using a low speed (c. 1,000 rpm) distribute evenly over the defect area, increase the speedto c. 1,800 rpmand polish using a light pressure to finish off.

NOTE: Always use a clean polishing pad to avoid unnecessary damage to surfaces. A safety data sheetis available on request.

Application with: Polishpad (blue/stable hard)

Product
filling quantity in ml
Art. Nr
PC 5000 Pre Cut

750 ml

ZV-PC5000750

PC 5000 Pre Cut

250 ml

ZV-PC5000250

go to OverviewHC 4000MC 3000FC 2000UC 1000

Polituren Headlines HC 4000 160 1
Zvizzer Polituren Doppelflaschen HC 4000 160 neu

HC 4000 HEAVY CUT SCRATCH REMOVER

Technical Description HeavyCut HC4000DESCRIPTION
Coarse-grained, modern grinding polish for fast processing of heavily weathered paints. Due to the amount and the very homogenous abrasive grain, this sanding polish ensures a fast and high sanding performance for the reliable removal of scratches and sanding marks from a grain size of P1500. Can be used on ALL (including scratch-resistant) fresh and cured paints. Silicone and solvent-free.

PROCEDURE
For processing we recommend the red polishing pad or Woolpad. Apply sufficient amount of HC 4000 to the paint defect / surface or polishing pad. Distribute evenly over the defect at a low speed (approx. 1.000 rpm), speed to approx. 1.800 rpm. increase and polish off the flaw with light pressure.

NOTE: Always use a clean polishing pad to avoid unnecessary damage to surfaces. A safety data sheetis available on request.

Application with: Polishpad (red/hard)

Product
filling quantity in ml
Art. Nr
HC 4000 Heavy Cut

750 ml

ZV-ST00016025HC

HC 4000 Heavy Cut

250 ml

ZV-ST00015020HC

go to OverviewPC 5000MC 3000FC 2000UC 1000

Polituren Headlines MC §000 160 1
Zvizzer Polituren Doppelflaschen MC 3000 160 neu 1

MC 3000 MEDIUM CUT ONE STEP

Technical Description MediumCut MC3000DESCRIPTION
One-step sanding/high gloss polish to remove fine scratches and marks from P3000 grit in one operation. Hologram free! The unique abrasive grain contained in the fine abrasive paste grinds continuously during processing so finely that, despite the high grinding performance, in only one polishing step, a perfect paint surface is achieved. Silicone and solvent-free. MC 3000 is fully suitable for all commercially available paint systems, including scratch-resistant paints.

PROCEDURE
For processing we recommend the orange polishing pad or lambskin. Apply sufficient amount of MC 3000 to the polishing pad or paint surface, spread at low speed (approx. 1.000 rpm) on the defect and apply approx. 1.800 rpm. and moderate pressure.

NOTE: Always use a clean polishing pad to avoid unnecessary damage to surfaces. A safety data sheetis available on request.

Application with: Polishpad (orange/medium)

Product
filling quantity in ml
Art. Nr
MC 3000 Medium Cut

750 ml

ZV-ST00016025MC

MC 3000 Medium Cut

250 ml

ZV-ST00015020MC

go to Overview – PC 5000 – HC 4000FC 2000UC 1000

Polituren Headlines FC 2000 160 1
Zvizzer Polituren Doppelflaschen FC 2000 160 neu

FC 2000 FINE CUT HOLOGRAM REMOVER

Technical Description MediumCut FC2000DESCRIPTION
Anti-hologram polish to effectively remove holograms. Intelligent, self-grinding alumina abrasive grains of the latest generation guarantee a 100% hologram-free paint surface. Free of solvents and silicone – purely water-based. Can be used on ALL (including scratch-resistant) fresh and cured paints.

PROCEDURE
For processing we recommend the yellow polishing pad. Apply sufficient amount of FC 2000 to the polishing pad or the paint surface, spread at low speed (about 1.000 rpm) on the defect and at about 1.600 rpm. and moderate pressure.

NOTE: Always use a clean polishing pad to avoid unnecessary damage to surfaces. A safety data sheetis available on request.

Application with: Polishpad (yellow/soft)

Product
filling quantity in ml
Art. Nr
FC 2000 Fine Cut


750 ml

ZV-ST00016025FC


FC 2000 Fine Cut


250 ml

ZV-ST00015020FC


go to Overview – PC 5000 – HC 4000MC 3000UC 1000

Polituren Headlines UC 1000 160 1
Zvizzer Polituren Doppelflaschen UC 1000 160 neu

UC 1000 ULTRAFINE CUT SWIRL REMOVER & SEALING

Technical Description UC 1000 ULTRAFINE CUT SWIRL REMOVER & SEALINGDESCRIPTION
The streak-free polish & sealer effectively removes the finest micro-scratches for a perfect, deep-gloss finish for extremely durable paint protection. Finest aluminum oxide micro abrasive grains of the latest generation guarantee a 100% paint surface. The contained ceramic coat emulsion seals and protects the paint for months. Can be used on ALL cured paints.

PROCEDURE
For processing we recommend the green polishing pad. Apply sufficient amount of UC 1000 to the polishing pad or the paint surface, spread at low speed (about 1.000 rpm) on the defect and at about 1.600 rpm. and moderate pressure.

Recommendation: NOTE: Always use a clean polishing pad to avoid unnecessary damage to surfaces. A safety data sheetis available on request.
For a quick and optimal finish, use an eccentric polishing machine.

NOTE: To avoid unnecessary damage to the surface, always use clean polishing pad!

Application with: Polishpad (green/ultrasoft)

Product
filling quantity in ml
Art. Nr
UC 1000 Ultrafine Cut

750 ml

ZV-ST00016025UC

UC 1000 Ultrafine Cut

25 0ml

ZV-ST00015020UC

go to Overview – PC 5000 – HC 4000MC 3000FC 2000